Electrical Relay

Product Details:

Description:- Safety relays PNOZ X monitor e.g. functions such as emergency stop, safety gates, light barriers, light grids, light curtains, limit switches. One PNOZ safety relay is used per safety function. Get best price of Pilz Safety Relay for Rs 500/-

Product Details:

PILZ PNOZ X2.8P Safety Relay, Model  777301Safety Relay, PNOZ X2.8P, 24VAC/DC,. PNOZ X Series Information. A Wide Range of Product types for all Safety Functions;nputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 3 N/O, 1 N/C,

Product Details:

PILZ PNOZ X3 230VAC 24VDC Safety relay Safety relay (standalone), inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 3 N/O, 1 N/C,1 SC, automatic/monitored start, UB 230 V AC/24 V DC, width: 45 mm, screw terminals integrated, monitoring of E-STOP, safety gates.

Product Details:

Schmersal SRB 301MC Series Single/Dual-Channel Light Beam/Curtain, Safety Mat/Edge, Safety Switch/Interlock Safety Introducing the PROTECT SRB301 series of Safety Relays. These are a perfect fit for signal evaluation, specifically the outputs of safety magnetic switches. They function well with such safety applications like ^{Light beams/curtains, Safety mats or Safety switches/interlocks.}

Product Details:

PNOZ X safety relays are proven through their reliability and robustness. You'll find them used over a wide area in the most diverse safety applications. Use one PNOZ X per safety function. Technical features are based on voltage free, electromechanical contacts in 2 relay technology. Sizes vary from 22.5 to 90 mm, the number of contacts from two to eight.

Product Details:

PILZ PNOZsigma Contact expansion. Outputs: 3 N/O, 1 N/C UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals. Contact block for contact expansion in connection with safety-related control components.

Additional Information:

• Delivery Time: 3-4 Days

Product Details:

Rockwell Automation MSR127TP Series Single-Channel Light Beam/Curtain, Safety Switch/Interlock Safety Relay, 24V ac/dc,Allen-Bradley 440R-N23132 Safety Relay MSR127TP Minotaur, Stop Category 0 Relay, 24V AC/DC Supply Voltage, Inputs: 1 N.C., 2 N.C., Light Curtain; Safety Outputs: 3 N.O.; Auxiliary Outputs: 1 N.C.; Removable Screw Terminals, 22.5mm Case

Product Details:

PILZ - 774325 PNOZ X5 24VACDC 2N/O 2 N/O Safety Contacts
• DIN Rail mounting as standard
• LED status indication to show supply voltage in the device
• Automatic or manual reset facility
• Simple, fast wiring
• Separate opening for checking the voltage

Product Details:

BT51 2TLA010033R2000 ABB BT51 24DC Safety relay
General Information

• Extended Product Type:BT51 24DC
• Product ID:2TLA010033R2000
• EAN:7350024432114
• Catalog Description:BT51 24DC Safety relay
• Long Description:Safety relay/expansion relay. Relay outputs 4NO

Product Details:

Safety relay for SIL 3 high and low-demand applications, also approved according to EN 50156, Germanischer Lloyd, and EN ISO 13849, emergency stop and safety door monitoring, single-channel, 2 enabling current paths, 1 alarm contact, plug-in screw terminal blocks, width: 22.5 mm

Product Details:

Siemens 3TK28 Series Single-Channel Safety Switch/Interlock Safety Relay, 24V ac/dc, 3 Safety Contact(s)

Product Details:

Pilz PNOZ X3 Series Dual-Channel Safety Switch/Interlock Safety Relay, 24 V dc, 110V ac, 3 Safety Contact(s). Safety relay (standalone), inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 3 N/O, 1 N/C,1 SC, automatic/monitored start, UB 110 V AC/24 V DC, width: 45 mm, screw terminals integrated, monitoring of E-STOP, safety gates.

Product Details:

PNOZmulti Classic, expansion module, failsafe, 8 digital inputs.Pilz PNOZmulti Series Input Module, 8 Inputs, 0 Outputs, 24 V dc.

Product Details:

PNOZmulti Motion Monitoring ModuleThe PNOZ ms2p module is used to monitor standstill, speed and direction of rotation up to Category 3 of EN 954-1. It can only be connected to a PNOZmulti base unit.

Product Details:

Schneider Electric XPS AF Series Single/Dual-Channel Safety Switch/Interlock Safety Relay, 24V ac/dc, 3 SafetyMonitoring of a movable guard Emergency stop monitoring 1-channel wiring Emergency stop monitoring 2-channel wiring 4 A fuse type gG or gL for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fuse type fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Product Details:

Safety relay (standalone) Inputs: 2-channel wiring with/without detection of shorts across contacts (PSEN 2.1p/2.2p) Outputs: 2 safety outputs + 1 auxiliary output in semiconductor technology Automatic/monitored start, UB 24 V DC, width: 22.5 mm, plug-in Terminals of screw type, connecting several devices, safety gate monitor. 

Product Details:

Configurable safety system PNOZmulti base module expandable, 20 safe digital inputs, 4 safe semiconductor outputs, 2 safe relay outputs.

Product Details:

Pepperl+Fuchs  SMART Transmitter Power Supply KFD2-STC4-Ex1.2O ·KFD2-STC4-EX1.20,
KFA6-SR2-EX2.W  , KCD2-STC-Ex1
KFD2-STC4-EX1.20-Y122582  2-channel isolated barrier

Product Details:

• 2-channel isolated barrier
• 24 V DC supply (Power Rail)
• Dry contact or NAMUR inputs
• Relay contact output

Product Details:

•  JOKAB SAFETY 2005200 SAFETY RELAY 2005200
• SAFETY RELAY
• VITAL1
• 24 VDC

Product Details:

Safety relay for monitoring emergency stop and protective door switch. Module Safety relay for monitoring emergency stop and protective door switch. Module used to safely interrupt electrical circuits.used to safely interrupt electrical circuits.

Product Details:

• 1-channel • DC version, positive polarity • Working voltage 26.5 V at 10 µA • Series resistance max. 327 Ω • Fuse rating 50 mA • DIN rail mounting The Zener Barrier prevents the transfer of unacceptably high energy from the safe area into the hazardous area. The zener diodes in the Zener Barrier are connected in the reverse direction. The breakdown voltage of the diodes is not exceeded in normal operation. If this voltage is exceeded, due to a fault in the safe area, the diodes start to conduct, causing the fuse to blow. The Zener Barrier has a positive polarity, i. e. the anodes of the zener diodes are grounded

Product Details:

Power requirements—the SR103AM will accept 24 VAC/DC, 115 VAC, or 230 VAC
Get Best Price Of OMRON  SAFETY SLIM RELAY For Rs.10000/-

Product Details:

• 1-channel isolated barrier • 24 V DC supply (Power Rail) • Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources • Signal splitter (1 input and 2 outputs) • Dual output 0/4 mA ... 20 mA, current sink • Terminal blocks with test sockets

Product Details:

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Input 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources
• Output 0/4 mA ... 20 mA
• Terminals with test points

Product Details:

• Selectable Operating Modes for Maximum Flexibility
• Widths from 12.5mm
• 6 LEDs for Diagnostics in Seconds
• Rapid Assembly on to Top Hat Rail
• Protection from Manipulation and Contamination

Product Details:

SMART Current Driver KFD2-SCD2-Ex1.LK · 1-channel isolated barrier · 24 V DC supply

Product Details:

SIRIUS safety relay with relay enabling circuits (EC) 115V AC, 22.5 mm Screw terminal EC instantaneous: 2 NO EC delayed: 0 NO SC: 0 NC AUTOSTART Basic device Maximum achieved SIL: 1, PL: c

Product Details:

Safety relay (standalone) Inputs: 1-/2-channel wiring with/without detection of shorts across contacts Outputs: 2 N/O, 1 N/C (t = 0 - 3 s) . Automatic/ monitored start UB 24 V DC, width: 22.5 mm, plug-in terminals of screw type Monitoring E-STOP, safety gates.

Product Details:

Safety Relay, MSR138DP, 24V AC/DC, Automatic/Manual Monitored, Removable, 45MM Housing Width, 0.15 to 3 Seconds Delay, Infinite, One 2 N.C. Input, One LC Input, 2 Safety Output, 3 N.O. Relay Delay Output, CAT 4 Rated

Product Details:

Contact expansion Inputs: Single-channel wiring Outputs: 4 N/O UB 24 V DC, width: 22.5 mm, contact block for contact expansion in connection with safety-related control components. Contact expansion Inputs: Single-channel wiring Outputs: 4 N/O UB 24 V DC, width: 22.5 mm, contact block for contact expansion in connection with safety-related control components.

Product Details:

Bestimmung/Gertebeschreibung NOT-AUS, Schutzt, Lichtschr_PNOZ The safety relay meets the requirements of EN 60947-5-1, EN 60204-1 and VDE 0113-1 and may be used in applications with ` E-STOP pushbuttons ` Safety gates ` Light beam devices

Product Details:

Safety relay (standalone) Inputs: 1-/2-channel wiring with/without detection of shorts across contacts Outputs: 2 safety outputs + 1 auxiliary output in semiconductor technology Automatic/monitored start, UB 24 V DC, width: 22.5 mm, plug-in Terminals of screw type, connecting several devices, Monitoring E-STOP, safety gates.

Product Details:

The KL4424 analog output terminal generates signals in the range between 4 to 20 mA. The power is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output stage is powered by the 24 V supply. In the KL4424, the four outputs are 2-wire versions. The Bus Terminal has a common ground potential. The power contacts are connected through. The reference ground of the outputs is the 0 V power contact. The LEDs indicate the data exchange with the Bus Coupler.

Product Details:

The PNOZ X3 range of Safety Relays by PILZ introduces your circuit to a safety related interruption wherein the primary applications are typically in potential hazardous environments where you need that quick power cut off. Particularly useful in automated environments with high foot traffic such as factories and warehouses.

Product Details:

PNOZsigma safety relay (standalone), inputs: 1-channel wiring without detection of shorts across contacts, manual/automaticstart, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 17.5 mm, plug-in spring-loaded terminals, monitoring of E-STOP, safety gates.

Product Details:

Pilz Safety Relays. SKU. 751124. Pilz - Safety, PNOZ s4.1 C 24VDC 3 n/o 1 n/c. PNOZsigma Safety relay (standalone). Inputs: 1-/2-channel wiring with/ without detection of shorts across contacts. Outputs: 2 N/O, 1 N/C, 1 semiconductor, UB 24 V DC, width: 22.5 mm, plug-in spring-loaded terminals. Monitoring E-STOP, safety gates.

Product Details:

 Phased-out product. The successor series is 3SK. Contactor safety combination for safety circuits Enabling and signaling circuit 5 NO+1 NC with self-latching mechanism K1 DC operation 24 V DC

Product Details:

Description:- Safety relays PNOZ X monitor e.g. functions such as emergency stop, safety gates, light barriers, light grids, light curtains, limit switches. One PNOZ safety relay is used per safety function. Emergency stop relay and safety gate monitor in accordance with VDE 0113, 11/98, EN 60204-1, 12/97 and IEC 204-1, 11/98, safety component in accordance with the Lift Directive 95/16/EC and EN 81-1/1998.

Features

• Monitored manual or automatic reset can be selected
• 1 semiconductor output (K1/K2)
• Each AC unit can be operated with 24 VDC
• Safety gate function with N/C-N/O combination
• Only dual-channel operation will detect shorts across the input contacts

Operating Modes

• Single-channel operation
• Dual-channel operation
• Automatic reset
• Monitored manual reset

Product Details:

Schmersal SRB 201ZH Series Dual-Channel Safety Switch/Interlock Safety Relay, 24V dc, 3 Safety Contact(s)