Programmable Logic Controller

Product Details:

Allen Bradley PLC I/O Module for use with MicroLogix 1500 SeriesInput Module,CompactLogix,DC Digital,32 Point 10-30V DC,32 Sinking or Sourcing Input

Product Details:

Output Module,CompactLogix,Relay Digital,16 Contacts at 2.5 A Relay Output,16 PointThe 1769-OW16 is Compact I/O expansion module. This module has Sixteen (16) Relay output channels. This module is designed for an operating voltage range of 5 - 265VAC and 5 - 125V DC. module is compatible for use with MicroLogix 1500 and CompactLogix controllers.

Product Details:

1783-US8T  Allen Bradley  Stratix 2000 8T Port Unmanaged Switch Male RJ45 to Male RJ45 Patchcord, Unshielded Twisted Pair, Teal TPE Cable, 1.9 m

Product Details:

Allen-Bradley 1794-IB16 FLEX I/O Input Module, 24V DC, 16 Sink Inputs. Number of Inputs: 16 Sink; Voltage, On-State Input, Nom: 24V DC

Product Details:

The EL1809 digital input terminal acquires the binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The power contacts are connected through. With the EL1809, the reference ground for all inputs is the 0 V power contact.

Product Details:

The Allen-Bradley 2094-BC02-M02-S is a Kinetix 6000 Drive component. This module is a 400VAC class Integrated Axis Module with continuous output current to bus 22.6 A and peak output current to bus of 45.2 A for series A and 56.4 for Series B, C and D drives. It has an efficiency of 97% and short-circuit current rating of 200,000 A (rms) symmetrical. This module has Safe-Torque Off functionality.

Product Details:

Guardlock Switch,440G-LZ,Power To Release, 2 N.C. Safety, 1 N.O. Lock Aux,Solid State Contacts,Standard Coded Actuator,8 Pin DC QD,Plastic

Product Details:

Allen-Bradley 1762-OB16 is a MicroLogix I/O expansion moduleThe Allen-Bradley 1762-OB16 is a MicroLogix Expansion I/O module. This module is a Solid State output module that comes with Sixteen (16) 24VDC output channels supporting sourcing wiring configuration. This module is externally powered by an input supply Voltage range of 20.4-26.4VDC. It may be used with MicroLogix 1100, MicroLogix 1200 and MicroLogix 1400 product family.

Product Details:

Siemens 6ES7132-4BF00-0AA0 SIMATIC S7 DP Electronic Module for ET 200S Distributed I/O System, (8) 24V DC Digital Outputs, 0.5A/each, 15 mm Width, Standard; Single Unit

Product Details:

Siemens Operator Panel, Series: AOP30, IP55, 156 mm Length, 212 mm Width, 31 mm Height

• Graphical backlit LCD display for plain text display and a bar display of process variables
• LED for display of the operating states
• Help function describing causes of and remedies for faults and alarms
• Keypad for operational control of a drive
• Local/remote switchover for selecting the operating location

Product Details:

Safety relay (standalone) Inputs: 1-/2-channel wiring with/without detection of shorts across contacts. Outputs: 3 N/O, 1 N/C, 2 N/O delayed UB 24 V DC, width: 112.5 mm, integral screw terminals, Monitoring E-STOP, safety gates with two freely selectable delay-on de-energisation contacts, 12 stages from 0 - 20/0 - 3 s.

Product Details:

New Siemens 6ES7 216-2BD23-0XB0 6ES7216-2AD23-0XB0 PLC Module In Box **Spare part*** SIMATIC S7-200, CPU 226 Compact unit, AC power supply 24 DI DC/16 DO relay 16/24 KB progr./10 KB data, 2 PPI/user-programmable interface

Product Details:

6ES7138-4CA01-0AA0 SIMATIC DP, PM-E power modules for ET 200S; 24 V DC with diagnostics 

• Dimensions: 2.0" x 0.0" x 3.0" (5.1 cm x 0.0 cm x 7.6 cm)
• Weight: 0 lbs 1.1 oz (0.0kg )
• Power Module for ET200S series

Product Details:

General Purpose Relay, PNOZ s7 Series, Interface, 4PST-NO, SPST-NC, 24 VDC, 6 A RELAY, 4NO, 1NC, 240VAC, 24VDC, 6A; Contact Configuration: 4PST-NO, SPST-NC; Coil Voltage: 24VDC; Contact Current: 6A; Product Range: PNOZ s7 Series; Relay Mounting: DIN Rail; Coil Type: -; Contact Voltage VAC: 240VAC; Relay Terminals: Spring Clamp; Contact Voltage VDC: 24VDC; Contact Material: Silver Copper Nickel; Coil Resistance: 30ohm; SVHC: No SVHC (15-Jan-2019); Average Power Consumption: 2W; Coil Voltage VDC Nom: 24V; Contact Current Max: 6A; Contact Voltage AC Nom: 240V; Contact Voltage DC Max: 24V; External Depth: 120mm; External Height: 102mm; External Width: 17.5mm; Relay Type: Interface

Product Details:

Revisions: Ser A Description: The 1794-OB32P is an Allen-Bradley Flex I/O electronically protected discrete output module. This module comes with individual channel protection, having thirty-two (32) 24 Volt DC sourcing output channels. It is compatible for use with the 1794-TB32 and 1794-TB32S terminal base units. It has an output current rating of 14.0 Amperes per module, with 6 Amperes total for channels 0...15 and 8 Amperes total for channels 16-31

Product Details:

SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V DC/0.5 A, 15 mm width, 5 units per packing unit SIMATIC DP,. 5 ELECTRON. MODULES FOR ET 200S,. 4 DO STANDARD DC 24V/0.5A, 15 MM WIDTH,. 

Product Details:

SIEMENS 6ES7134-4FB51-0AB0 ANALOG INPUT MODULE ET 200S distributed I/O 2AI U HS analog electronic module

Product Details:

SIMATIC DP, PM-E power modules for ET 200S, 24-48 V DC, 24-230 V AC, with diagnostics and fuse 6ES7138-4CB11-0AB0 SIEMENS SIMATIC DP, PM-E power modules for ET 200S, 24-48 V DC, 24-230 V AC, with diagnos.

Product Details:

SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO RELAY 24V DC - 230V AC/5A,15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT SIMATIC DP, 5 ELECTRON. MODULES FOR ET 200S, 2 DO RELAY 24V DC - 230V AC/5A,15 MM WIDTH FIRST-UP SIGNAL WITH LED SF (GROUP FAULT), 5 PIECES PER PACKAGING UNIT

Product Details:

The Pilz PNOZmulti series expansion module safe relay output is the latest innovation that enables Volt-free switching of the actuator. It has a supply voltage of 24VDC. This module has 4 relay output of 3A and is available in screw terminal type

Product Details:

The EL2904 TwinSAFE component is a digital output terminal with four channels. It switches 24 V DC actuators with up to 0.5 A per channel and has four fail-safe outputs. The outputs are controlled by a TwinSAFE Logic-capable component via FSoE. The component automatically switches off if it detects an error (fail-stop).

Product Details:

The KL2408 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. It is protected against reverse polarity connection and handles load currents with outputs that are protected against overload and short-circuit. The Bus Terminal contains eight channels which indicate their signal state by means of light emitting diodes. It is particularly suitable for space-saving use in control cabinets. The connection technology is optimized for single-ended inputs. All components have to use the same reference point as the KL2408. The power contacts are looped through. The outputs are supplied by the 24 V power contact.

Product Details:

The KL3454 analog input terminal processes signals in the range between 4 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted, in an electrically isolated form, to the higher-level automation device. The KL3458 combines eight channels in one housing and is particularly suitable for space-saving installation in control cabinets. The use of single conductor connection technology enables the connection of multi-channel sensor technology with minimum space requirements. The power contacts are connected through. The reference ground for all inputs is the 0 V power contact. Overload is detected. The terminal status is relayed to the controller via the K-bus. The run LEDs indicate the data exchange with the Bus Coupler, the error LEDs overload or wire breakage

Product Details:

Safety relay (standalone) Inputs: 1- / 2-channel wiring with detection of shorts across contacts Outputs: 2 N/O. Automatic/monitored start UB 24 V AC/DC, width: 22.5 mm, plug-in terminals of screw type Monitoring ESTOP, safety gates.

Product Details:

Contact expansion, inputs: 1-channel wiring, outputs: 4 N/O, UB 24 V DC, width: 25 mm, plug-in screw terminals, contact block for contact expansion in connection with safety-related control components.

Product Details:

• Manufacturer : Honeywell

• Product No. : 2MLR-CPUH/T

• Product Type : High Speed CPU Module

• Program Execution methods :Cyclic scan, Time-driven interrupts, Internal Memory interrupts

Product Details:

General Electric Automation and Controls, the IC200PWR102 is a VersaMax expanded power supply unit with extended functionality. This power supply unit is used to give power to several types of devices which are connected to the backplane—input and output modules, processing units, and network interface units, for example

Product Details:

The KL3314 analog input terminal allows four thermocouples to be connected directly. The Bus Terminal’s circuitry can operate thermocouple sensors using the 2-wire technique. Linearization over the full temperature range, which can be selected freely, is realized with the aid of a microprocessor. The error LEDs indicate a broken wire. Compensation for the cold junction is made through an internal temperature measurement at the terminals. The KL3314 can also be used for mV measurement.

Product Details:

Allen-Bradley 1768-L43 CompactLogix L43 Controller, 2 Mbyte User Memory, 16 Tasks, 1-Port RS- 232 serial (DF1 or ASCII); Communication options: EtherNet/IP, ControlNet, DeviceNet; Serial Port

Product Details:

***no longer available*** SIMATIC HMI IPC 477C optional bundle with WinCC flexible 2008/WinAC, 15" Touch display, 1024x 768; 4 USB (back)+1 USB (front) Standard front Celeron M 1.2 GHz, PROFINET (IE); 2x 1 Gbit 1 GB -RAM, DDR3; 2nd CF slot not equipped CF card: 4 GB Windows Embedded Standard 2009 pre-installed without SIMATIC software

Product Details:

Stratix 5700, 16 copper 10/100 ports, 2 combo(copper or SFP slot) 10/100 ports, 2 SFP 10/100 slots, lite FW  Stratix 5700 Switch, Managed, 16 Fast Ethernet Copper Ports, 2 Fast Ethernet Combo Ports, 2 Fast Ethernet Fiber SFP Slots, Lite Software
Manufacturer: Allen-Bradley

Product Details:

6ED1055-1FB00-0BA2 SIEMENS LOGO DM8 230R expansion module, PS/I/O: 230V/230V/relay,6ED1055-1FB00-0BA

Product Details:

SIMATIC DP, Electronics module f. ET200S, 4 F-DO PROFIsafe, 24 V

Product Details:

_{Mitsubishi FX1S-30MT-DSS FX Series 24 VDC Sink/Source Transistor (Source), 16 Inputs, 14 Outputs}

Product Details:

The EL2809 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The power contacts are connected through. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. In the EL2809 the outputs are supplied via the 24 V DC power contac

Product Details:

The 1794-OB32P is an Allen-Bradley Flex I/O electronically protected discrete output module. This module comes with individual channel protection, having thirty-two (32) 24 Volt DC sourcing output channels. It is compatible for use with the 1794-TB32 and 1794-TB32S terminal base units. It has an output current rating of 14.0 Amperes per module, with 6 Amperes total for channels 0...15 and 8 Amperes total for channels 16-31.

Product Details:

Allen-Bradley 1747-BA is a SLC 500 Lithium Battery. It has a Voltage of 3 Volts .Allen Bradley ControlLogix Lithium Battery for Processor

Product Details:

Allen-Bradley 1769-ECL Compact I/O Left End Cap/Terminators

Product Details:

6FC5311-0AA00-0AA0

Product Details:

We Providing service and repairs for all industrial automation items such as VFD'S,PLC,HMI,MOTORS,ENCODERS,RELAY'S ETC.,