New Items

Product Details:

1-channel isolated barrier 24 V DC supply (loop powered) 2- or 3-wire Pt100 RTD input Output 4 mA ... 20 mA, temperature linearization selectable  DIP switch selectable ranges Sensor breakage detection
Pepperl & Fuchs RTD Converter KFD0-TR-1 , KFD0-TR-EX1 

Product Details:

HWS300-24/RY is an ultra-reliable, conservatively rated  HWS300 series single output industrial power supply. . It has a limited lifetime warranty, unique to the industry. This also meet conducted and radiated emission standards without additional filtering or shielding. It includes overcurrent, overvoltage protection. Application includes industrial, test, LED, broadcast, communication, semi-fab. Certified by IEC/EN/UL/CSA62368-1, 60950-1, EN50178-1, UL508(5).

• AC input voltage range from 85 to 265VAC, DC input voltage range from 120 to 330VDC
• Output voltage is 24V, maximum current is 14A
• Efficiency is 82 / 85% (115/230VAC)
• Class B conducted and radiated EMI, easier system EMC compliance
• Very conservative electrolytic capacitor ratings, long service life
• Limited lifetime warranty, low cost of ownership, suitable for industrial control equipment
• Switching frequency is 190KHz, screw terminals connectors, aluminum case material
• Operating temperature range from -10 to +70 (derate linearly to 50% load from 50 to 70)
• Size (W x H x D) is 2.4 x 3.23 x 6.5inch

Product Details:

Guard Locking Switch - TLS-GD2: Soloenoid Voltage: 24V AC/DC, Contacts(Safety and Aux): 2 Normally Closed, 1 Normally Open, Actuator: No Actuator, Conduit Entry: M20 Conduit

Product Details:

• Safety Relays, BT51 Series
• Item Number: 2TLA010033R2000
• Name: BT51 24DC Safety Relay
• BT51 Series Information
• Single and Dual Channel
• Test/Reset Input
• LED Indication
• Quick Release Connector Blocks
• The BT50 is designed to connect safety devices, such as emergency stops, directly in the voltage supply circuit to the relay.

Product Details:

SAFETY CONTROLLER, GUARD DOOR AND EMERGENCY-STOP, 24 VAC/DC OPERATING VOLTAGE, ENABLING OUTPUTS: 3NO/2NO/1NC

Product Details:

New Hitachi SX14Q004 is one of the most popular LCD Module which is mainly used in industrial and medical applications. It is a 5.7 inch diagonal CSTN-LCD display panel product from Kaohsiung Hitachi Electronics Co., Ltd. (hereafter called Hitachi), with an integral CCFL backlight system, without touch screen. It’s resolution 320(RGB)×240, QVGA  70PPI and contrast ratio 40:1 (Typ.) (TM). It features an operating temperature range of 0 ~ 60°C , a storage temperature range of -20 ~ 70°C , and the maximal vibration level of 1.2G (11.76 m/s²). Our engineers has entered all the specification details about this LCD screen according to the datasheet. Although errors may occur during this process.

Product Details:

Bulletin MPL - Low-Inertia Brushless Servo Motors Product, 460 V, Frame Size 3 = 100 mm (3.94 in.), Stack Length 30 = 76.2 mm (3.0 in.), 5000 RPM, Multi-turn High-resolution Encoder (absolute feedback). Keyed Shaft Extension, SpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect), No Brake, IEC Metric, Free Mounting Holes Allen-Bradley  MP-Series MPL 480V AC Rotary Servo Motor ,MPL-B330P-MJ72AA

Product Details:

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with maximum mechanical speed of 6000RPM and IP54 parallel keyed shaft without holding brake.

Product Details:

TESCH F122X04 6 NO Safety Contacts, 24 VDC 2 AMP, Extension Module, Discontinued by Manufacturer, 24 VAC/VDC, Safety Relay, 2 NC Auxiliary Contacts, 250 VAC 4 AMP

Product Details:

• Typ: F122x04
• FNr: 07400036
• 24VAC/DC, 50/60 Hz
• 240VAC, 6S, 2)
• AC15 250V 4A; DC13 24V 2A

Product Details:

The CX5130 has an Intel Atom® multi-core processor with a clock rate of 1.75 GHz. This makes genuine multi-core technology possible in the Embedded PC segment. The hardware interfaces in this series are oriented and implemented identically to those of the existing CX5000 series. Two independent, Gigabit-capable Ethernet interfaces as well as four USB 2.0 and a DVI-I interface are available. A multitude of further connection options and gateway functions is created by an option interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-bus or K-bus terminals.

Product Details:

ABB RDCO-03C add-on module with coated circuit board for RMIO Motor Control and I/O Board used in ACS800 Series Inverters. Includes connectors for fibre optic DDCS channels CH0, CH1, CH2 and CH3.

Product Details:

One of four power supply modules can be selected for CX1010/CX1020 systems. The power supply of all other system components is ensured via the internal PC/104 bus; no separate supply lines are required. However, the CX1100 components offer further important characteristics that go beyond a pure power supply: an integrated NOVRAM enables the fail-safe storage of process data, an LC display with two lines of 16 characters each is used for displaying system and user messages. The power supplies of the CX system can be changed in the field.

Product Details:

Siemens C98040-a7002-c1-5 Power Supply Board C98043-a7002-l4-12
Siemens
C98040-a7002-c1-5
Ysu/X26344A22Aab
C98043-a7002-l4-12
0020Nrh
47974-3
Tw-4
94V-0
Weight: 860 Gm

Product Details:

Limit values when operated in short-circuit protected network: max. 8 A.  May not exceed or fall below Uv tolerances. Without load.With light/dark ratio 1:1. Signal transit time with resistive load. Short-circuit-proof. Reference voltage DC 50 V

Product Details:

Koyo Direct Logic F4-08AD 8 Channel Analog Input Module
Koyo Direct Logic F4-08AD 8 Channel Analog Input Module

Product Details:

• Manufacturer : Honeywell

• Product No. : 51304754-150

• Product type : MC-PAIH03 High Level Analog Input Processor-16 Inputs

• FTA Models: MU-TAIH02, TAIH12, TAIH52, TAIH03, TAIH13, TAIH23, TAIH53, TAIH22, TAIH62

• Input Type: Voltage, current (2-wire or self-powered transmitters)

• Input Channels : 16 differential input channels

Product Details:

PanelView Plus 7 Performance Terminal, Touch Screen, 10in SVGA, TFT Color, Ethernet DLR, 24V DC, Windows 10 IoT OS, Performance Model : 2711P-T10C22D9P

Product Details:

PILZ Safety, PZE X4P C 24VDC 4n/o. Contact expansion Inputs: Single-channel  ID NO: 787585   Contact expansion Inputs: Single-channel wiring Outputs: 4 N/O UB 24 V DC, width: 22.5 mm, plug-in spring-loaded terminals. Contact block for contact contact expansion in connection with safety-related control components.

Product Details:

Safety relay (standalone), inputs: Per pushbutton 1 N/O, 1 N/C, outputs: 3 N/O, 1 N/C, UB 24 V DC, width: 22.5 mm, plug-in screw terminals, twohand control relay/monitoring of simultaneity of two-hand pushbuttons

Product Details:

Safety relay (standalone), inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 2 N/O, UB =110 V AC/24 V DC, width: 45 mm,screw terminals integrated, monitoring of E-STOP, safety gates, pressure-sensitive mats (to short circuit principle),feedback loop. Pilz 774063

Product Details:

Screw the suitable adapter into the process connection.
Place the flow monitor onto the adapter and tighten the nut. Tightening torque 25 Nm. Ensure that the unit is correctly oriented.
IFM Operating instructions Flow monitors SI5010 ,SI5000,SI5004

Product Details:

Status-/fault indication via LEDs • 3 NO safety outputs • 1 transistor output or 1 NC contact • Short circuit monitoring • Suitable for light curtain applications

Product Details:

LCD Upgrade Kit for 9″ Fanuc A61L-0001-0093 /A02B-0120-C051 CRT includes 

Product Details:

 

KINGSERVO Motor & Drive KSDG00421LIP ,KSMA04LI4P,

Product Details:

The CX5130 has an Intel Atom® multi-core processor with a clock rate of 1.75 GHz. This makes genuine multi-core technology possible in the Embedded PC segment. The hardware interfaces in this series are oriented and implemented identically to those of the existing CX5000 series. Two independent, Gigabit-capable Ethernet interfaces as well as four USB 2.0 and a DVI-I interface are available. A multitude of further connection options and gateway functions is created by an optional interface, which can be pre-equipped ex factory, as well as the I/O level, which can optionally consist of either E-bus or K-bus terminals.

Product Details:

discrete input module Twido - 16 inputs - 24 V DC : TWDDDI16DT
discrete output module Twido - 16 outputs - relay  : TWDDRA16RT  
Schneider Electric  Modules

Additional Information:

• Delivery Time: 3-4 weeks
• Packaging Details: well packed

Product Details:

Cable version, Parts included: HMI with EN,DE,FR,ES Language, Connection size [in]: 1, Connection type: G, Insertion length [mm]: 5000, Supply voltage [V] DC: 14 - 30

Product Details:

SEW EURODRIVE MC07B0008-5A3-4-00 INVERTER MOVITRAC B DRIVE 0.75
SEW EURODRIVE MC07B0008-5A3-4-00 INVERTER MOVITRAC B DRIVE 0.75 

Product Details:

This HART termination board has 16 terminal blocks to connect up to 16 HART field devices. It has an integrated, switchable 220 load resistor and an integrated ground capacitor. It also has terminal blocks for the 4 mA ... 20 mA signal to the DCS/ PLC. A 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board. Other termination boards are available. Contact Pepperl+Fuchs for details
 FI-PFH-NS0137-R ,225293 

Product Details:

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This power supply module has a primary voltage of 100V to 240V AC. It is a power supply module with a secondary power of 31.2W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W.

Product Details:

Timing relay SIRIUS 3RP25, 27 functions, for all switching operations involving time delays in control, starting, protection and regulation circuits.
Wide range of applications due to wide variety of functions within a very small space. Can be used worldwide thanks to international approvals and wide range of voltages. The innovative enclosure concept in an industrial design offers labelled cover caps, removable terminals and much more.

Available as single or multifunctional time relay with semi-conductor output or as electromechanical relay with or without positively driven operation, in each case with various connection technologies.
The scope of supply already includes adhesive films for marking of functions.
The 3RP25 timing relays replace the well-proven 3RP15 series.

Product Details:

Timing relay, Multifunction Phased-out product !!! For further information, please contact our sales department 2 change-over contacts, 8 functions 15 time ranges (0.05 s-100 h) screw terminal Positively driven and gold-plated relay contacts 24-240 V AC/DC at 50/60 Hz AC  Timing relay, Multifunction Phased-out product !!! For further information, please contact our sales department 2 change-over contacts, 8 functions 15 time ranges (0.05 s-100 h) screw terminal Positively driven and goldplated relay contacts 24-240 V AC/DC at 50/60 Hz AC

Product Details:

777340 Pilz Two-hand control relayPilz Two-hand control relay P2HZ X1P 24VDC 3n/o 1n/c 2soSkip to the beginning of the images galleryPilzPILZ 777340 PNOZ X Safety Relay, 5 A, 24 V Coil MPN # 777340

PILZ, 777340, Safety Relay, Series: PNOZ X, 5 A, 2.5 W Power, 24 V Coil, 240 VAC Contact, DIN Rail Mounting, Screw Terminal, -25 to 55| deg C, 94x45x121 mm Dimensions

Product Details:

communication module, Modicon X80, Serial link module, 2 RS485 or 232 ports in Modbus and character mode.Serial link module with 2 RS-485/232 ports in Modbus and Character modeBMXNOM0200 Serial Link Module with 2 RS-485/232 Ports Schneider Electric 

Additional Information:

• Production Capacity: 10
• Delivery Time: 30 days

Product Details:

Allen Bradley 194E-A80-1753 3P Pole Isolator Switch - 80A Maximum Current, 37kW Power Rating,
Allen Bradley 194E-A80-1753 3P Pole Isolator Switch - 80A Maximum Current, 37kW Power Rating,

Product Details:

Omron CJ1W-OD232  CJ-series  Digital output unit, 32 x transistor outputs Program Controller 

Product Details:

ABB Ai810 S800 I/O Analog Input Module 3BSE008516R1
0(4)..20mA, 0..10V, 12Bit, single ended. 

Additional Information:

• Delivery Time: 2-3 days

Product Details:

Universal 85 - 305VAC or 120 - 430VDCinput voltage Accepts AC or DC input (dual-use of sameterminal)  Operating ambient temperature range: -30℃to+70℃ Low standby power consumption, high efficiency High I/O isolation test voltage up to 4000VAC Low ripple & noise  Output short circuit, over-current, over-voltageprotection OVC Ⅲ (designed to meet EN61558)  Operating up to 5000m altitude

Product Details:

Pepperl Fuchs P&F KCD2-STC-EX1.20 Analog Input-SMART Transmitter Power Supply
< 1-channel isolated barrier < 24 V DC supply (Power Rail) < Input for 2-wire SMART transmitters and current sources < Output for 4 mA ... 20 mA or 1 V ... 5 V < Housing width 12.5 mm < Up to SIL 2 (SC 3) acc. to IEC/EN 61508