Power Supply

Product Details:

Allen-Bradley Make Saftey Relay
Model No:MSR138.1DP (440R-M23088)The MSR138DP is a versatile safety relay which can be connected in four different input wiring configurations to suit your application: 1 N.C., 2 N.C., or 2 PNP connections from a light curtain. This unit checks for cross faults across the two inputs when connected in the 2NC fashion, and when connected to light curtains, the light curtain must perform the cross fault detection. This relay has output monitoring that can be configured to either automatic/manual reset or monitored manual reset. With manual reset, the safety relay checks the output monitoring circuit through the manual application of the reset switch. The safety outputs have independent and redundant internal contacts to help ensure the safety function.

Product Details:

The EL9410 power supply terminal is used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data). This current is fed into the E-bus by the relevant coupler’s power supply unit. In configurations with a large number of terminals it is possible to use the EL9410 in order to supply an extra 2 A to the E-bus. The EL9410 has a diagnostic function which is displayed by LED and on the process image.

Product Details:

The EL9100 potential feed terminal enables the setup of different potential groups with the standard voltage 24 V DC. The supply voltage is taken up via the front terminal contacts and passed through to the adjacent terminals via the internal power contacts. The E-bus is passed through in the usual way to the adjacent terminal. A Power LED indicates the operating state

Product Details:

The EL5101 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential signals (RS422) or TTL single ended signals. Input frequencies up to 1 MHz can be evaluated. Two additional 24 V digital inputs are available for storing, blocking and setting the counter status. The error message output of an encoder can be connected and evaluated via the status input. The 5 V and 24 V supply of the encoder can be provided directly via the terminal connection point

Product Details:

The KL9185 Bus Terminal allows the supply voltage to be accessed a number of times via spring force terminals. The Bus Terminal makes it unnecessary to use additional terminal blocks on the terminal strip.

Product Details:

Safety Relay, MSR126.1R, 24V AC/DC, Manual Monitored, Fixed, 22.5MM Housing Width, Infinite, One 2 N.C. Input, One LC Input, 2 Safety Output, CAT 4 Rated

Product Details:

The Allen-Bradley 1769-IF8 is a Compact I/O analog input module with Eight (8) input channels. This module is designed to interface field devices that sends 0-21 mA and +/- 10VDC analog signals. This module is compatible for use with a 1769 CompactLogix chassis or MicroLogix 1500 controller.

Product Details:

The 1769-L33ER controller is an Allen-Bradley/Rockwell Automation controller from the CompactLogix series and the CompactLogix 5370 product line. It can be mounted on a panel or a DIN Rail, and its mounting base will affect its shock ratings. The 1769-L33ER controller can tolerate 20 g of operating shock on a DIN Rail and 30 g of operating shock on a panel. Its maximum operating temperature is 140 degrees Fahrenheit and its maximum storage and transport temperature is 185 degrees Fahrenheit. The 1769-L33ER controller can handle 32 periodic or continuous tasks at a time and it can handle up to 100 programs per task.

The Allen-Bradley 1769-L33ERM is a Compact GuardLogix 5370 L3 Controller. This controller features 2 MB user memory and 1GB non-volatile memory that ships with the controller. It supports up to 16 compact I/O modules and 3 expansion I/O banks. It has built-in 2 Ethernet communication ports and 1 USB interface. This controller has an integrated motion capability and supports up to 8 motion axes and integrated safety feature

Product Details:

PNOZcompact safety relay (standalone), inputs: 2-channel wiring with detection of shorts across contacts, manual/automatic start, outputs: 3 N/ O, 1 N/C, UB 24 V DC, width: 22.5 mm, spring-loadedterminals fixed at the front of the unit, monitoring of E-STOP, safety gates. 

Product Details:

The 1762-IQ16 is an Allen-Bradley MicroLogix module with Sixteen (16) 24VDC channel input module. This input module is suitable expansion module for MicroLogix 1100 / 1200 / 1400 Programmable Logic Controllers (PLC

Product Details:

Honeywell 51204174-175 AO Analog Output FTA MC-TAOY52 ,MC-TA0Y52
Honeywell 51204174-175 AO Analog Output FTA MC-TAOY52

Additional Information:

• Production Capacity: 10

Product Details:

A MicroLogix 1500 controller is composed of a processor (1764-LSP or enhanced 1764-LRP with RS-232 port) and a base unit. The FET transistor outputs are available on the 1764-28BXB base unit only

Product Details:

CompactLogix 750KB Enet Controller 1769-L32E ,1769-L35E Allen Bradley CompactLogix EtherNet Processor 
The Allen-Bradley CompactLogix 1769 programmable controllers are designed to provide a cost-effective, compact control solution for small to medium-sized applications. Includes integrated safety and adoption of the same programming software, network protocol and information capabilities included in all Logix controllers

Product Details:

SICK UE410-4R03 SAFETY EXTENSION RELAY D-79183.1x 1x SICK UE410-4R03 SAFETY EXTENSION RELAY D-79183.UE410-4R03 SAFETY EXTENSION RELAY D-79183.

Product Details:

MTLx541 provides a fully-floating dc supply for energising a conventional 2- or 3-wire 4/20mA transmitter, which is located in a hazardous area, and repeats the current in another floating circuit to drive a safe-area load

Product Details:

Description:- The PSW-Series is a single-output multi-range programmable switching DC Power Supply covering a power range up to 1080W. This series of products include fifteen models with the combination of 30V, 80V, 160V, 250V, and 800V rated voltages and 360W, 720W and 1080W maximum output powers. The multi-range feature allows the flexible and efficient configuration of voltage and current within the rated power range. As the PSW-Series can be connected in series for maximum 2 units or in parallel for maximum 3 units, the capability of connecting multiple PSW units for higher voltage or higher current output provides a broad coverage of applications. With the flexibility of multi-range power utilization and series/parallel connection, the PSW Series significantly reduces the user’s investment for various power supply products to accommodate the projects with different power requirements. The CV/CC priority selection of the PSW-Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode is activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Series is able to run under CC priority to limit the current spike occurred at the threshold voltage and therefore protect DUT from the inrush current damage.

Features

• Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W ~ 1080W
• Constant Power Output for Multiple Range (V&I) Operation
• CV/CC Priority; Particularly Suitable for the Battery and LED Industry
• Adjustable Slew Rate
• Series Operation: Up to 2 units (30V, 80V, 160V models only)
• Parallel Operation: Up to 3 units
• High Efficiency and High Power Density
• 1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
• Standard Interface: LAN,USB,Analog Control Interface
• Optional Interface: GPIB-USB Adaptor, RS232-USB Cable
• LabView Driver

Product Details:

Safety Relay MSR127T Minotaur, 24V AC/DCRelay, GuardMaster, MSR127RTP, Single Function, Safety, 24 Volt AC/DC, 1 or 2 Normally Closed, Light Curtain, Inputs, 3 Normally Open, Safety Outputs, 1 Normally Closed, Auxiliary Outputs, Fixed

Product Details:

440R-B23020 AB MSR5T SAFETY RELAY 24VAC/DC 3NO+1NC One 2 N.C. Input,NO 1 N.O and 1 N.C. Input,No Safety Mat Inputs,No LC Inputs,Not Applicable,No SAFE EDGE inputs,No SIPHA inputs,One 1 N.C. Input,No N.O. inputs supported,No N.O. Inputs Supported,NO 3 N.C. Input

Product Details:

MasterLogic Programmable Logic Controller (PLC) is a modular, scalable rack-based industrial controller delivering powerful performance in a control application. It is applied in various processing applications in industries such as oil and gas, steel, cement, power, food and beverage and delivers a blend of power, performance and efficiency.
Honeywell Module 2MLR-DBSF ,2MLR-DBDF 

Product Details:

Allen-Bradley 440R-N23135 24 VAC/VDC 3NO 35 mm Din Rail Monitored Manual Single Function Safety Relay

Product Details:

The Allen-Bradley 1756-RM2 is a ControlLogix Redundancy Module. This module enables Controller Redundancy by pairing with another 1756-RM2 from the other ControlLogix chassis. 

Product Details:

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-pole

SIMATIC S7-300, SM 321 ED module, with galvanic separation, 16 digital inputs: DC 24V, 20-pole connector

Product Details:

6ES7322-1FH00-0AA0.SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-pole
6ES7322-1FH00-0AA0.  SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-pole

Product Details:

SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CDSIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD

Product Details:

SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)
SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module
SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module

Product Details:

Basic unit SIMOCODE pro S, PROFIBUS DP interface 1.5 Mbit/s, 4I/2O freely parameterizable, Us: 110...240 V AC/DC, input for thermistor connection Monostable relay outputs, expandable by a multifunctional module

Product Details:

Power Supply, 24 VDC Only, Up to 6 Modules Expansion, POINT Bus Backplane, 16 DI (Sink), 16 DO (Source), 2 Ethernet Port (DLR), Support Class 1, 3 Network Comms, 4 TCP Connections, 0.375MB Internal, 1GB SD Card Inbox

Product Details:

6ES7321-1BH02-0AA0 siemens simatic s7-300, digital input sm 321, isolated  simatic s7-300, digital input sm 321, optically isolated, 16di, 24 v dc, 1 x 20 pin

Product Details:

Size / Dimension. 13.780" L x 4.882" W x 2.756" H (350.00mm x 124.00mm x 70.00mm) ; Features. Memory, Programmable, RS232 and RS485 Interface ; Power (Watts).

Product Details:

Details:- 

• Warning Explosion Hazard 
• When In Hazardous Locations Turn Off Power Before Replacing Or Wiring Modules
• Ind. Cont. Eo. For Haz. Loc. Class I DIV. 2 Groups ABCD Temp Code T4A Surr. Air 60C Ex nA IIC T4 x 0C<60C
• GE Intelligent Platforms
• V11197

Product Details:

SITOP PSU300S 40 A stabilized power supply input: 400-500 V 3 AC output: 24 V DC/40 A  SIEMENS SITOP PSU300S 40A Stabilized power supply input: 3 AC 400-500 V output: 24 V DC/40 A

Product Details:

SIEMENS 6ep1336-2ba10 (6ep13362ba10)135 eur plcs - siemens - sitop - power supplies siemens 6ep1336-2ba10 (6ep13362ba10)

Product Details:

Sinamics g120 control unit cu240e-2 pn e-type safety integrated sto profinet 6di, 3do, 2ai, 2ao, max 1f-di ptc/kty interface usb- and sd/mmc-interface protection ip20 ambient temp 0 to +50 deg c without power module and panel

Product Details:

Hoeywell  2MLR-AC12 , 2MLR-AC12-CC HONEYWELL POWER SUPPLY MODULE 2MLR-AC12-CC HONEYWELL 2MLR-AC12-CC POWER SUPPLY MODULE MASTER LOGIC-200 POWER: AC 100-120V 5VDC, 5.5A PROGRAMMABLE LOGIC CONTROLLER-2MLR-AC12

Product Details:

Pilz 750124 PILZ PNOZ S4.1 SAFETY RELAY PNOZsigma safety relay (standalone), inputs: 1/2-channel wiring with/ without detection of shorts across contacts, manual/automatic start, outputs: 3 N/O, 1 N/C, 1 SC, UB 24 V DC, width: 22.5 mm, plug-in screw terminals, monitoring of E-STOP, safety gates, light guard.

Product Details:

 751105 PILZ  PNOZ s5 series Safety Relay for monitoring PNOZsigma Safety relay (standalone). Inputs: 1-/2-channel wiring with/ without detection of shorts across contacts Outputs: 2 N/O, 2 N/O (t = 0 - 300s), 1 semiconductor UB 24 V DC, width: 22.5 mm, plug-in spring-loaded terminals. Monitoring E-STOP, safety gates.

Product Details:

Pilz PNOZ XV2 30/24VDC 2n/o 2n/o t Safety Relay
ID No:774500 , ID NO : 774502 Pilz PNOZ XV2 Series Dual-Channel Safety Switch/Interlock Safety Relay, 24V dc, 2 Safety Contact(s)

Product Details:

IFM Make AS-Interface Power Supply
Model No: AC1218 

• Power supply
• AS-i power supply 115/230 V AC
• Integrated data decoupling
• Jumper to deactivate the AS-i communication
• AS-i switch power supplies SilverLine
• 240 watts

Product Details:

774542. Safety relay (standalone), inputs: 1/2-channel wiring with/without detection of shorts across contacts, outputs: 3 N/O, 2 N/Ot-d, UB = 24 V DC
PNOZ XV3  SAFETY RELAY 3/24VDC 3N/O 2N/O T. 774542

Product Details:

Safety gate monitor, Instantaneous E-STOP monitoring, Limit switch, Light beam device mon. Type 4, Light beam device mon. Type 2 with t/p, Light beam device mon. Type 2 w/o t/p Single-channel, Automatic reset, Dual-channel, Manual reset, Detection of shorts across contacts, Start-up testing, Monitored manual reset, without detection of shorts across contacts, Self test
Pilz Relay 750101,751103

Additional Information:

• Delivery Time: 4 days